Notebook digital battery test system
HYNN high precision battery testing system is mainly designed for notebook and digital product lithium battery pack. With high power, high precision and high performance, it can meet to all ability test requirements for notebook and digital product battery pack with the range of 0-20V (Voltage), 0-10A (Current).

Model：NT0505C, NT01005C, NT01010C, NT02005C, NT02010C
详情信息

Functional characteristics

1. Battery circulation life test.

2. Battery capacity test.

3. Battery charging/discharging characteristics test.

4. Battery charge retention ability test.

5. Battery charging/discharging efficiency test.

6. Battery over-charging/over-discharging endurance ability test.

7. Battery dynamic test.

8. Battery SMBUS/I2C/HDQ test.


System characteristics

1. High precision, high performance, high standard.

2. High reliability, low failure rate.

3. Intelligent charging and discharging.

4. Single point independence, capable of setting individual charging and discharging conditions to each Channel.

5. Device precision 0.02%, data recording time of 1 sec/time, high stability.

6. Supporting various chip plans such as SBS, I2C, HDQ, capable of automatic identification.

7. Powerful software function, friendly human-computer interface.

8. Four-wire output interface.

9. Modular design concept, easy to maintain.

10. Modular design concept, pluggable design of case, easy to maintain.

11. Clear and comprehensive data, capable of connecting and uploading MES system.


Specifications and parameters

S/N

Model

NT0505C

NT1005C

NT1010C

NT2005C

NT2010C

1

Main channel number

96CH/Cabinet

96CH/Cabinet

48CH/Cabinet

96CH/Cabinet

48CH/Cabinet

2

Channel action mode

Independent control

3

Main channel working mode

Charging: constant current charging CC, constant voltage charging CV, constant current constant voltage charging CC-CV

Discharging: constant current discharging CD, constant power discharging CP

Standing and stop

4

Termination condition for main channel test

Time, total voltage, total current, capacity, temperature, etc.

5

Voltage

Channel test range

0~5V

0~10V

0~10V

0~20V

0~20V

Minimum discharge voltage

2V

Precision

± (0.05%RD+0.05%FS)

Resolution ratio

0.1mV

6

Current

Channel test range

±5A

±5A

±10A

±5A

±10A

Minimum output current

20mA

Precision

± (0.05%RD+0.05%FS)

Resolution ratio

0.1mA

7

Time

Resolution ratio

1s

8

Power

Output power

Single-channel continuous operation power

25W

50W

100W

100W

200W

Stability

±0.1%FS

9

Communication mode

RS-485

10

Date

recording

Time interval

Time≥1s

Voltage triggering

Voltage≥1mV

Current triggering

Current ≥1mA

11

Interface comminication

Support Gas Gauge related data reading and revising(SMBUS/I2C/HDQ). Device conducts real-time detection of data on protective board during charging and discharging process. It also conducts data conparising, screens and changes the data on the protective board, etc.

12

Support chip

All-chip plan support

13

Sampling terminal

Four-wire connection mode and separation of current line from voltage line

14

Dimension

800 (Width) * 1,000 (Depth) * 1,800 (Height) mm

15

Distribution requirements

380V/220V/50Hz  Power: 8KW




热门推荐更多
Power battery test system Power battery test system

The energy saving test system for power battery pack independently developed by Shenzhen HYNN Technology Co., Ltd. can carry out charging and discharging test of working condition to packed power battery system, detect capacity, efficiency, charging status, heat properties and other comprehensive properties of the battery pack, verify detection precision and accuracy of energy status of the battery management system, and provide reliable basis for effective management after the battery pack is assembled on vehicles.

 Electric vehicles and energy storage test system Electric vehicles and energy storage test system

The design of electric vehicles and energy storage system meets the needs of saving energy and reducing production costs during the battery production process by balancing the total loop power to make the utilization of battery power more efficient.

 EOL test system EOL test system

Current battery module and pack testing process is lowly automated, and the record analysis is in poor capabilities. Aimed at these problems, HYNN proposed a fully intelligent tester, EOL test system. The system integrates insulation testing, BMS calibration, OCV testing and other functions to achieve the entire workflow fully intelligent and automated, in order to reduce labor cost and improve efficiency.

 Balanced charge and discharge test system Balanced charge and discharge test system

HYNN battery charging and discharging testing system is mainly designed for lithium battery cell balance. The equipment can test single battery cell for independent charging-discharging, as well as the pack balance performance. The channel is in modular design: channel number can be change flexibly according to battery string number; Overall channels are stackable; The series circuit is kept on when charging. Designed with high efficiency, high accuracy and high performance, it can meet all test requirements for battery pack battery charging and discharging testing.